User Tools

Site Tools


wiki:documentation:monika:piezobuzzer_using_usb_daq

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wiki:documentation:monika:piezobuzzer_using_usb_daq [2020/07/24 05:17]
mscholz
wiki:documentation:monika:piezobuzzer_using_usb_daq [2020/07/29 23:57]
mscholz [Installing the DAQ on Ubuntu]
Line 9: Line 9:
 ===== Installing the DAQ on Ubuntu ===== ===== Installing the DAQ on Ubuntu =====
  
-New software package from NationalInstrument:  [[https://www.ni.com/de-de/support/downloads/drivers/download/unpackaged-linux.ni-linux-device-drivers.350003.html]] Install the .deb version using GUI or+Does not workSwitched to Arduino Uno.
  
-<code bash> +===== Creating sounds with Arduino ===== 
-sudo apt install *.deb  + 
-sudo apt update  +Using the toneAC library for Arduino, we can get 10V pp sounds on the piezo(The modulate the 9 and 10 pins which can do PWM out of phase to create a larger potential difference than the maximum 5V for normal Pin out.) 
-sudo apt install ni-daqmx + 
-</code>+If this is sufficient amplitude, we should be able to trigger the sounds from the arduino, as well as the camera.
wiki/documentation/monika/piezobuzzer_using_usb_daq.txt · Last modified: 2020/07/29 23:57 by mscholz

Bitnami