User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wiki:documentation:monika:piezobuzzer_using_usb_daq [2020/07/24 05:18]
mscholz [Installing the DAQ on Ubuntu]
wiki:documentation:monika:piezobuzzer_using_usb_daq [2020/07/29 23:57]
mscholz [Installing the DAQ on Ubuntu]
Line 9: Line 9:
 ===== Installing the DAQ on Ubuntu ===== ===== Installing the DAQ on Ubuntu =====
-New software package from NationalInstrument:  [[]] Install the .deb version using GUI or+Does not workSwitched to Arduino Uno.
-<code bash> +===== Creating sounds with Arduino =====
-sudo apt install *.deb  +
-sudo apt update  +
-sudo apt install ni-daqmx +
-This takes quite whileWhen doneinstall the python package to communicate with the DAQ:+Using the toneAC library for Arduino, we can get 10V pp sounds on the piezo. (The modulate the 9 and 10 pins which can do PWM out of phase to create larger potential difference than the maximum 5V for normal Pin out.
 +If this is sufficient amplitudewe should be able to trigger the sounds from the arduino, as well as the camera.
wiki/documentation/monika/piezobuzzer_using_usb_daq.txt · Last modified: 2020/07/29 23:57 by mscholz