User Tools

Site Tools


wiki:documentation:monika:piezobuzzer_using_usb_daq

This is an old revision of the document!


PiezoBuzzer using USB DAQ

Goal is to use the NI DAQ inherited from MNS for triggering the piezo buzzer.

The DAQ comes with

Installing the DAQ on Ubuntu

New software package from NationalInstrument: https://www.ni.com/de-de/support/downloads/drivers/download/unpackaged-linux.ni-linux-device-drivers.350003.html Install the .deb version using GUI or

sudo apt install *.deb 
sudo apt update 
sudo apt install ni-daqmx

This takes quite a while. When done, install the python package to communicate with the DAQ:

wiki/documentation/monika/piezobuzzer_using_usb_daq.1595593082.txt.gz · Last modified: 2020/07/24 05:18 by mscholz

Bitnami